Consideraciones técnicas para diseño de máquina de conformar tejas metálicas en el taller T-13 de Placetas
Fecha
2018-07
Autores
Valencia Rivero, Javier A.
Título de la revista
ISSN de la revista
Título del volumen
Editor
Universidad Central "Marta Abreu" de Las Villas. Facultad de Ciencias Agropecuarias. Departamento de Ingeniería Agrícola
Resumen
En el trabajo se analizan las particularidades constructivas y de funcionamiento de
la máquina conformadora de tejas metálicas instalada en el CAI José María Pérez
tomada como referencia, y sobre la base del análisis de sus ventajas, desventajas,
principio de trabajo y partes componentes, así como sobre la base del análisis
realizado a otras máquinas similares existentes, se propone una serie de
consideraciones técnicas para el posterior diseño de una máquina que con
idénticos fines, debe ser construida y explotada en el taller T-13 de Placetas,
previa capacitación al personal encargado de operar la misma en cuanto a
riesgos.
The work analyzes the constructive and operational characteristics of the metal tile forming machine installed in the CAI José María Pérez, taken as a reference, and based on the analysis of its advantages, disadvantages, work principle and component parts, as well as On the basis of the analysis performed on other similar machines, a series of technical considerations is proposed for the subsequent design of a machine that, with the same purposes, must be built and exploited in the T-13 workshop of Placetas, after training the personnel in charge to operate the same in terms of risks.
The work analyzes the constructive and operational characteristics of the metal tile forming machine installed in the CAI José María Pérez, taken as a reference, and based on the analysis of its advantages, disadvantages, work principle and component parts, as well as On the basis of the analysis performed on other similar machines, a series of technical considerations is proposed for the subsequent design of a machine that, with the same purposes, must be built and exploited in the T-13 workshop of Placetas, after training the personnel in charge to operate the same in terms of risks.
Descripción
Palabras clave
Diseño de Máquina, Tejas Metálicas