Propuesta de norma cubana para la producción y utilización de cementos base clínquer-caliza-arcilla calcinada en Cuba, basada en la modificación de la NC-96:2011
Fecha
2016-06-26
Autores
Bacallao Rodríguez, Yaimara
Título de la revista
ISSN de la revista
Título del volumen
Editor
Universidad Central “Marta Abreu” de Las Villas. Facultad de Construcciones. Departamento de Ingeniería Civil
Resumen
En el presente trabajo se realizó un estudio de documentos normativos nacionales e internacionales referentes a la utilización de puzolanas como Materiales Cementicios Suplementarios (MCS) en la elaboración de cementos mezclados, con el objetivo de complementar la NC-96:2011 “Cemento con adición activa. Especificaciones”.
Se realizó una comparación entre los parámetros físicos, químicos y mecánicos establecidos por la ASTM C595/C595M–14 “Especificaciones para Cementos Hidráulicos Mezclados” y los resultados obtenidos en los ensayos realizados en condiciones industriales a los cementos base clínquer-caliza-arcilla calcinada. Se demostró que los cementos propuestos a incorporar en la norma cubana cumplen con los requerimientos establecidos en la norma norteamericana.
Finalmente se elaboró una propuesta de norma cubana para la producción y comercialización de cementos base clínquer-caliza-arcilla calcinada en nuestro país, a partir de la modificación de la NC-96:2011. La norma propuesta se presentó al Comité Técnico de Normalización No. 22 “Cemento y Cal” para su discusión y análisis.
In this paper a study of national and international policy documents concerning the use of pozzolan as Cementitious Materials Supplemental (SCM) for the production of blended cements was carried out with the aim of complementing the NC-96: 2011 "Cement with active addition Specifications". A comparison between the physical and chemical parameters, and mechanical established by ASTM C595 / C595M-14 "Specifications for Cementos Hydraulic Mingling" and the results of the tests conducted under industrial conditions on the based cement clinker-lime-calcined clay was performed. It was shown that cements proposed to incorporate in the Cuban standard meet the requirements established in the American Standard. Finally, a proposal for Cuban standard for the production and marketing of cement clinker-based calcined limestone-clay in our country, from modifying the NC-96: 2011 was developed. The proposed standard was submitted to the Technical Committee for Standardization No. 22 "Cement and Lime" for discussion and analysis.
In this paper a study of national and international policy documents concerning the use of pozzolan as Cementitious Materials Supplemental (SCM) for the production of blended cements was carried out with the aim of complementing the NC-96: 2011 "Cement with active addition Specifications". A comparison between the physical and chemical parameters, and mechanical established by ASTM C595 / C595M-14 "Specifications for Cementos Hydraulic Mingling" and the results of the tests conducted under industrial conditions on the based cement clinker-lime-calcined clay was performed. It was shown that cements proposed to incorporate in the Cuban standard meet the requirements established in the American Standard. Finally, a proposal for Cuban standard for the production and marketing of cement clinker-based calcined limestone-clay in our country, from modifying the NC-96: 2011 was developed. The proposed standard was submitted to the Technical Committee for Standardization No. 22 "Cement and Lime" for discussion and analysis.
Descripción
Palabras clave
Norma Cubana de Producción y Utilización de Cementos, Cementos Base Clínquer-Caliza-Arcilla Calcinada, Modificación de la NC-96:2011, Cuba, Materiales Cementicios Suplementarios (MCS), Comité Técnico de Normalización No. 22 “Cemento y Cal”