Evaluación de las potencialidades existentes en los talleres agropecuarios de la provincia Sancti Spíritus, para ejecutar con calidad las operaciones de asistencia técnica
Fecha
2017-07-02
Autores
Pentón Yero, Manuel Alejandro
Título de la revista
ISSN de la revista
Título del volumen
Editor
Universidad Central " Marta Abreu de Las Villas ". Facultad de Ciencias Agropecuarias. Departamento de Ingeniería Agrícola.
Resumen
El trabajo consiste en la evaluación de los talleres de destinación agropecuaria,
encargados de asimilar las operaciones de asistencia técnica a la maquinaria
agrícola en la provincia Sancti Spíritus, durante el período de tiempo comprendido
entre los meses de enero a marzo del 2017. Para el estudio se elaboró la base
metodológica correspondiente, arribándose a la conclusión de que no existe una
distribución uniforme de las máquinas herramientas, equipamiento tecnológico y
medios de medición en los talleres estudiados, razón por la cual la calidad con que
se ejecutan estas operaciones no puede ser la mejor en todos los casos, cuestión
que se agrava por el hecho de que los obreros que laboran en esos talleres, en
ninguno de los casos, como quedó demostrado, estudia o se supera. De ahí la
necesidad de presentar un grupo de recomendaciones para actualizar a los
decisores de la provincia en temas relacionados con la organización de los talleres
agropecuarios.
El trabajo está expuesto en un total de 52 páginas, incluyendo 17 tablas y 13 figuras,
cuenta con la Introducción, tres capítulos, conclusiones y recomendaciones. Para su
confección se utilizaron 34 fuentes y bibliografías, y en el cuerpo de la memoria del
trabajo están asentados tres anexos, que forma un volumen general del mismo de 126
páginas.
This work consists of evaluating workshops for agricultural destination, persons in charge of understanding the operations of technical assistance to the agricultural machinery at Sancti Spíritus province during the period from January to March 2017. For this study a methodological guideline was made, therefore it was concluded that there is no uniform distribution of machinery tools, technological equipment or measurement aids either in the field studied, that is why it is the reason for which the quality of the operations to be performed are affected, such action is aggravated due to totally of the workers who work there do no t study or do not receive any kind of self learning or course. Thus, the need for presenting a group of recommendations to update the provincial decision makers on the latest topics related to the organization of the agricultural workshops. This paper is presented in 52 pages, including 17 graphs and 13 pictures; the main body of this investigation report is distributed by an introduction, three chapters, conclusion and recommendation. To complete it, 34 references and sources were consulted and three annexes placed in the main body of the paper which covers the general volume of 126 pages.
This work consists of evaluating workshops for agricultural destination, persons in charge of understanding the operations of technical assistance to the agricultural machinery at Sancti Spíritus province during the period from January to March 2017. For this study a methodological guideline was made, therefore it was concluded that there is no uniform distribution of machinery tools, technological equipment or measurement aids either in the field studied, that is why it is the reason for which the quality of the operations to be performed are affected, such action is aggravated due to totally of the workers who work there do no t study or do not receive any kind of self learning or course. Thus, the need for presenting a group of recommendations to update the provincial decision makers on the latest topics related to the organization of the agricultural workshops. This paper is presented in 52 pages, including 17 graphs and 13 pictures; the main body of this investigation report is distributed by an introduction, three chapters, conclusion and recommendation. To complete it, 34 references and sources were consulted and three annexes placed in the main body of the paper which covers the general volume of 126 pages.
Descripción
Palabras clave
Talleres, Durabilidad, Mantenimiento, Reparación