Izaguirre Castellanos, EduardoHernández Santana, LuisUrquijo Pascual, Orlando2019-02-042019-02-042014-02-06Citar según la fuente original: Izaguirre, E., Hernández, L., & Urquijo, O. (2014). Kinematic task space scheme for 3dof pneumatic parallel robot in motion control application. Paper presented at the Scientific Conference UCLV-VLIR 2014.978-959-250-952-8https://dspace.uclv.edu.cu/handle/123456789/10725The tracking of the wanted position of 3-DOF parallel robot and it sorientation in the Cartesian coordinate frame attached to the mobile platform in 3D space (task space) are important in industrial driver simulator’s performance. The goal of this work is to implement in a 3-DOF parallel industrial robot,a kinematic control scheme in task space coordinates. The inverse kinematics model is used to obtain the desired joint position coordinates from the time-varying trajectory given in task space. The proposed cascade control scheme in task space is based in two loops,the innerloop consisting in a decoupled joint position control and the outerloop which is designed to obtain an appropriate task space positioning. In order to avoid the on-line computation of direct kinematics,an arrangement of inertial sensor and optical encoders are employed to provide the accurate pose measurement of end-effector. The experiments demonstrate the great performance of the cascaded control scheme in motion application.en-USEste documento es Propiedad Patrimonial de la Universidad Central “Marta Abreu” de Las Villas. Los usuarios podrán hacer uso de esta obra bajo la siguiente licencia:Creative Commons4.0 License: Atribución-No Comercial-Compartir IgualParallel Robot ControlTask Space ControlMotion SimulatorProceedingsUniversidad Central “Marta Abreu” de Las Villas