Diseño de molde para la obtención de ceniceros por inyección de metal
Fecha
2016-07-24
Autores
Manso Reyes, Ernesto
Título de la revista
ISSN de la revista
Título del volumen
Editor
Universidad Central ‘‘Marta Abreu’’ de Las Villas. Facultad de Ingeniería Mecánica e Industrial. Departamento de Ingeniería Mecánica
Resumen
En el presente trabajo se aborda sobre el estado actual del diseño de moldes para la inyección de piezas metálicas mediante la recopilación de información actualizada. Se estudian y comparan las principales variantes de moldeo que han surgido en los últimos años. A partir del análisis de la bibliografía consultada, así como de algunos aportes realizados por el autor se analizaron los principales aspectos tecnológicos a tener en cuenta para el diseño de moldes para la inyección de metal. También se diseñó un molde para la obtención de una pieza tipo cenicero y se realizó un análisis económica que permite evaluar financieramente el precio de importación y elaboración del molde en los talleres de maquinado de la EMI Ernesto Che Guevara.
Presently work is approached on the current state of the design of molds for the injection of metallic pieces by means of the summary of up to date information. They are studied and they compare the main variants of I model that they have arisen in the last years. Starting from the analysis of the consulted bibliography, as well as of some contributions carried out by the author the main technological aspects they were analyzed to keep in mind for the design of molds for the metal injection. A mold was also designed for the obtaining of a piece type ashtray and he was carried out an economic analysis that allows to evaluate the import price and elaboration of the mold financially in the shops of having schemed of the EMI Ernesto Che Guevara.
Presently work is approached on the current state of the design of molds for the injection of metallic pieces by means of the summary of up to date information. They are studied and they compare the main variants of I model that they have arisen in the last years. Starting from the analysis of the consulted bibliography, as well as of some contributions carried out by the author the main technological aspects they were analyzed to keep in mind for the design of molds for the metal injection. A mold was also designed for the obtaining of a piece type ashtray and he was carried out an economic analysis that allows to evaluate the import price and elaboration of the mold financially in the shops of having schemed of the EMI Ernesto Che Guevara.
Descripción
Palabras clave
Inyección de Metal, Piezas Metálicas, Diseño de Moldes, EMI Ernesto Che Guevara, Piezas de Aluminio, Refrigeración