Caracterización de los Plásticos Reforzados con Fibra de Vidrio fabricados en Cuba
Archivos
Fecha
2010-07-03
Autores
Bernardo Reyes, Lianet
Título de la revista
ISSN de la revista
Título del volumen
Editor
Universidad Central "Marta Abreu" de las Villas
Resumen
En este trabajo se presenta la aplicación de ensayos a tracción y flexión en elementos de plástico reforzado con fibra de vidrio con el objetivo de lograr la caracterización de este material, que está compuesto por una matriz poliéster y refuerzos de fibras de vidrio E presentado bajo diferentes formas de tejidos (Mats y Roving). Se realizaron ensayos a probetas hechas con los diferentes tipos de tejidos de la fibra de vidrio E para evaluar las propiedades físico-mecánicas de cada uno. Las probetas utilizadas como muestra del material ensayado fueron rectangulares de 190 x 15 mm de sección y de 9.5 mm de espesor. Se realizó el diseño de experimento para determinar el número de muestras a analizar y así observar la evolución del proceso de daño. El material se modeló en el programa de elementos finitos Abaqus, para validar su utilización y luego se compararon los resultados obtenidos de los ensayos reales y virtuales.
This work shows the characterization of different types of polyester matrix materials reinforced with E fibreglass (Mats and Roving) through traction and flexion tests. To evaluate the physical-mechanical properties, different materials constructed with diverse kinds of E fibreglass were tested. The material samples assayed were rectangular with 190 x 15 mm of section and 9.5 mm of thickness. The experiment was designed to estimate the number of samples necessary to observe the evolution of the damage process. In order to validate its suitability, these composed materials were modeled using the program of finite elements Abaqus. The results obtained by real and virtual tests were then compared.
This work shows the characterization of different types of polyester matrix materials reinforced with E fibreglass (Mats and Roving) through traction and flexion tests. To evaluate the physical-mechanical properties, different materials constructed with diverse kinds of E fibreglass were tested. The material samples assayed were rectangular with 190 x 15 mm of section and 9.5 mm of thickness. The experiment was designed to estimate the number of samples necessary to observe the evolution of the damage process. In order to validate its suitability, these composed materials were modeled using the program of finite elements Abaqus. The results obtained by real and virtual tests were then compared.
Descripción
Palabras clave
Plásticos Reforzados con Fibra de Vidrio, Ensayo a Tracción, Ensayo Flexión, Propiedades Físico-Mecánicas de Fibra de Vidrio, Elementos Finitos Abaqus, Plastics, Elements