Procedimiento para la determinación del comportamiento mecánico de sustratos ductiles revestidos con filmes finos mediante ensayos de identación
Archivos
Fecha
2007-06-20
Autores
Hafed Didi, Luali
Título de la revista
ISSN de la revista
Título del volumen
Editor
Universidad Central "Marta Abreu" de Las Villas
Resumen
La disposición de filmes finos resistentes al desgaste es una práctica realizada con
bastante frecuencia para mejorar el comportamiento tribológico (fricción, desgaste,
lubricación) de diferentes piezas y componentes. Con el fin de garantizar el adecuado
funcionamiento del sistema (substrato+filme) revestido, es importante aliviar el
comportamiento mecánico del mismo. Un método bastante simple para el estudio del
comportamiento mecánico de estos sistemas es el ensayo de indentacion.
En este trabajo, se realiza la construcción, montaje y puesta a punto de una instalación
experimental para el estudio del fenómeno de indentación con desplazamiento, así como establece el procedimiento metodológico para la determinación del comportamiento mecánico de sustratos dúctiles revestidos con filmes finos mediante ensayos de indentación.
The deposition of wear resistant thin films is frequently used to improve the tribological behavior (friction, wear and lubrication) of different components and parts. In order to guarantee the adequate performance of the coated system (film+substrate), it is usually important to evaluate the mechanical behavior of the coated system. A simple method for the evaluation of this behavior is the indentation test. In this work, the construction, assembly and setting about to an experimental installation for the study of the indentation phenomenon with displacement is carried out, as well it establishes the methodological procedure for the determination of the mechanical behavior of ductile substrates had with fine films by means of indentation rehearsals.
The deposition of wear resistant thin films is frequently used to improve the tribological behavior (friction, wear and lubrication) of different components and parts. In order to guarantee the adequate performance of the coated system (film+substrate), it is usually important to evaluate the mechanical behavior of the coated system. A simple method for the evaluation of this behavior is the indentation test. In this work, the construction, assembly and setting about to an experimental installation for the study of the indentation phenomenon with displacement is carried out, as well it establishes the methodological procedure for the determination of the mechanical behavior of ductile substrates had with fine films by means of indentation rehearsals.
Descripción
Palabras clave
Sustratos Dúctiles Revestidos, Comportamiento Mecánico, Filmes Finos, Ensayos de Indentación