Considerations for the energy balance and preliminary design of an experimental LC3 Cement Pilot Plant

dc.contributor.authorMachado López, Iván
dc.contributor.authorHerrera Moya, Idalberto
dc.contributor.authorMartirena Hernández, José Fernando
dc.contributor.departmentUniversidad Central "Marta Abreu" de Las Villas. Facultad de Construcciones. Centro de Investigación y Desarrollo de las Estructuras y los Materiales (CIDEM)en_US
dc.coverage.spatialSUIZAen_US
dc.date.accessioned2020-03-17T18:20:16Z
dc.date.available2020-03-17T18:20:16Z
dc.date.issued2019-06-15
dc.description.abstractAssociated with cement manufacturing processes, large amounts of carbon dioxide (CO2) are released into the atmosphere, it is estimated that between 0.65 - 0.90 tons of CO2 are emitted per ton of cement manufactured. By 2050, the demand for this binder is expected to exceed 5,000 million tons, which would contribute to an increase of more than 3% of emissions. However, the emissions can be reduced by using supplementary cementitious materials (SCM), in this sense the calcined clays have a great potential for the reduction of emissions in the manufacture of cement, has been studied in recent years’ low carbon cement or LC3, developed by a joint team of the University of Lausanne and the Central University of Las Villas. The main results are the expansion of production by achieving clinker substitutions of up to 50%. In this sense, the Center for Research and Development of Technologies and Materials (CIDEM) in conjunction with the company IPIAC-NERY has committed to the development of a small pilot plant that makes the manufacture of limited quantities of LC3, which allows the study of the process by interacting different sources of raw materials. In this paper some calculations were for designing a pilot plant, taking into account the balance of mass and energy necessary for its proper functioning, which in turn allows to specify the technology for the scaling of the production in any new industrial plant or adaptation of capacities installed.en_US
dc.identifier.citationAros Oñate, N. (2010). Control predictivo no lineal de un horno rotatorio Ier Congreso Iberoamericano de ingeniería de proyectos, . Antofagosta, Chile. Escuela Politécnica Nacional. Trabajo de Diploma. Dairon, J. A. C. (2017). Evaluación económica y ambiental de plantas prototipo de pequeño y mediano tamaño para la producción de cemento LC3. . Facultad de Construcciones. CIDEM. . Santa Clara. Cuba. 2017. , Universidad Central Marta Abreu de Las Villas. . TD.  Dpto. técnico IPIAC, N. (2018). Estimación del consumo de combustible. Torres Nova, Portugal:  DUDA, W. (1977). Manual tecnológico del cemento. Traducido por Antonio Sarabia González. España: Editores técnicos asociados.  F. G. Colina, I. C. y. J. C. (2016). "Diseño básico de hornos rotatorios para el tratamiento de minerales." Ingenieria Quimica. Julio/ Agosto 2016 Dpto. de Ingeniería Química y Metalurgia. Universitat de Barcelona.  Orihuela, E. M. (2007). Análisis energético de las diversas alternativas aplicables a una planta de clinkerizacion y producción de cemento. . Ingeniería Energética y Mecánica de Fluidos. Escuela Superior de Ingenieros. . Sevilla. , Universidad de Sevilla. . TD.en_US
dc.identifier.doihttps://doi.org/10.1007/978-3-030-22034-1en_US
dc.identifier.issnISSN 2211-0852en_US
dc.identifier.urihttps://dspace.uclv.edu.cu/handle/123456789/12485
dc.language.isoen_USen_US
dc.relation.journalProceedings of the international conference of sustainable production and use of cement and concrete. ICSPCC 2019en_US
dc.source.endpage10en_US
dc.source.initialpage3en_US
dc.source.issue22en_US
dc.subjectMassen_US
dc.subjectEnergyen_US
dc.subjectLow Carbon Cementen_US
dc.subjectClayen_US
dc.titleConsiderations for the energy balance and preliminary design of an experimental LC3 Cement Pilot Planten_US
dc.typeArticleen_US
dc.type.article1en_US

Archivos

Bloque original
Mostrando 1 - 1 de 1
No hay miniatura disponible
Nombre:
A Considerations for the energy balamce Machado L I and et all .docx
Tamaño:
2.2 MB
Formato:
Microsoft Word XML
Bloque de licencias
Mostrando 1 - 1 de 1
No hay miniatura disponible
Nombre:
license.txt
Tamaño:
3.33 KB
Formato:
Item-specific license agreed upon to submission
Descripción: