Estudio de la estructura y la resistencia al desgaste abrasivo del metal depositado con electrodos tubulares base; Fe-Cr-Mn-C y Fe-Cr- Mn-V-C
Fecha
2014-07-20
Autores
Hernández Expósito, Manuel Eduardo
Título de la revista
ISSN de la revista
Título del volumen
Editor
Universidad Central "Marta Abreu" de Las Villas
Resumen
En el trabajo se fabricaron dos variantes de electrodos tubulares revestidos, con el objetivo de evaluar la estructura y la resistencia al desgaste abrasivo del metal depositado. Para la fabricación de los electrodos, se utiliza en el núcleo el sistema aleante: Fe-Cr-Mn-C y Fe-Cr-Mn-V-C, y en el revestimiento un sistema de escorias del tipo: CaO-CaF2-TiO2. El ensayo de resistencia al desgaste abrasivo se realizó en correspondencia a lo establecido por el procedimiento ¨B ¨ de la norma ASTM G65.
In this work, two flux cored coated electrodes to evaluate the structure and abrasive wear resistances of the deposited metal were manufactured. For manufacturing the electrodes is used in the alloying system: Fe-Cr-Mn-C and Fe-Cr-Mn-V-C and in the coating, the slag system: CaO-CaF2-TiO2. The tests of abrasive wear were conduced in accordance to procedure ¨B¨ of standard ASTM G65.
In this work, two flux cored coated electrodes to evaluate the structure and abrasive wear resistances of the deposited metal were manufactured. For manufacturing the electrodes is used in the alloying system: Fe-Cr-Mn-C and Fe-Cr-Mn-V-C and in the coating, the slag system: CaO-CaF2-TiO2. The tests of abrasive wear were conduced in accordance to procedure ¨B¨ of standard ASTM G65.
Descripción
Palabras clave
Desgaste Abrasivo, Metal, Electrodos Tubulares Revestidos, Resistencia, Norma ASTM G65