Determinación de la lubricidad de la mezcla combustible 10-35-55

dc.contributor.advisorNegrín Hernández, Luis Iván
dc.contributor.advisorLópez Díaz, Iosvani
dc.contributor.authorConcepción Fandiño, Lester
dc.coverage.spatial1016432en_US
dc.date.accessioned2015-10-28T16:26:14Z
dc.date.available2015-10-28T16:26:14Z
dc.date.issued2014-07-20
dc.description.abstractEn el presente trabajo se realiza una revisión bibliográfica acerca de las mezclas combustible, donde se determinó que la mezcla diésel-etanol en la actualidad representan una posible solución para alargar la vida de los combustibles fósiles y evitar así su desaparición definitiva. Según la literatura consultada, la mezcla compuesta por un 10 por ciento de diésel, 35 porciento de aceite de higuereta y 55 por ciento de etanol (10-35-55) ofrece resultados favorables, la cual puede ser utilizada en un motor de encendido por compresión sin necesidad de modificar. Fue seleccionado el estudio de espiga en disco (PIN on DISC) el cual no pretende representar todas las condiciones que pueden experimentarse durante la explotación de una máquina o equipo. Por esta razón no se garantiza que existan resultados de la magnitud del desgaste para condiciones que difieran de las de este procedimiento de ensayo. La mezcla combustible en comparación con el diésel arrojó mejores resultados, disminuyendo el volumen perdido en un 16.66 por ciento. Esto demuestra un mejor comportamiento en cuanto a la lubricidad y por lo tanto la posibilidad de prolongar la vida útil de cualquier componente que sea lubricado por el propio combustible. Los ensayos donde se utilizó la mezcla combustible ofreció un valor de coeficiente de desgaste (K) menor que en los ensayos anteriores, debido a que el mismo es directamente proporcional a la pérdida de volumen, que es la única variable diferente en cada ensayo.en_US
dc.description.abstractThis present work is carried out by a bibliographical revision about the mixtures combustible, where it was determined that the mixture diesel - ethanol represents a possible solution at the present time to lengthen the life of the fossil fuels and to avoid, this way, its definitive disappearance. According to the consulted literature the mixture composed by ten percent of diesel 35 percent of fig oil and 55 percent of ethanol (10-35-55 ) offers favorable results, which can be used in a motor of having lit by compression without necessity of modifying. The selected study was Pin On Disc, which doesn't seek to represent all the conditions that can be experienced during the exploitation of a hose or engine. For this reason it is not guaranteed that results of the magnitude of the waste exist for conditions that differ of those of this rehearsal procedure. The combustible mixture in comparison with the diesel threw better results diminishing the lost volume by 16.66 percent. It demonstrates a better behavior as for the lubricity and therefore the possibility to prolong the useful life of any component that is lubricated by fuel itself. The rehearsals where the combustible mixture was used offered a value of waste coefficient (K) smaller than in the previous rehearsals, because the same one is directly proportional to the lost of volume, which is the only different variable in each rehearsal.en_US
dc.description.sponsorshipFacultad de Ingeniería Mecánica. Departamento de Ingeniería Mecánicaen_US
dc.description.statusnon-publisheden_US
dc.identifier.urihttps://dspace.uclv.edu.cu/handle/123456789/2738
dc.language.isoesen_US
dc.publisherUniversidad Central "Marta Abreu" de Las Villasen_US
dc.rightsEste documento es Propiedad Patrimonial de la Universidad Central “Marta Abreu” de Las Villas. Los usuarios podrán hacer uso de esta obra bajo la siguiente licencia: Creative Commons: Atribución-No Comercial-Compartir Igual 4.0 Licenseen_US
dc.subjectCombustible 10-35-55en_US
dc.subjectLubricidad de la Mezclaen_US
dc.subjectCombustibles Fósilesen_US
dc.subjectMezcla diésel-etanolen_US
dc.titleDeterminación de la lubricidad de la mezcla combustible 10-35-55en_US
dc.typeThesisen_US
dc.type.thesisbacheloren_US

Archivos

Bloque original
Mostrando 1 - 1 de 1
Cargando...
Miniatura
Nombre:
Lester Concepción Fandiño.pdf
Tamaño:
1.84 MB
Formato:
Adobe Portable Document Format
Bloque de licencias
Mostrando 1 - 1 de 1
No hay miniatura disponible
Nombre:
license.txt
Tamaño:
3.33 KB
Formato:
Item-specific license agreed upon to submission
Descripción: